Idaho

  • Aero Precision M5 (.308) Enhanced M-LOK Handguard Gen 2 15"

    Aero Precision M5 (.308) Enhanced M-LOK Handguard Gen 2 15″

    $220.00

    DESCRIPTION Our Aero Precision M5 (.308) Enhanced M-LOK Handguard Gen 2 15″ provide a lightweight free float design for your custom M5 .308 build. The M-LOK system allows advanced modularity past the current 1913 picatinny rail system. Machined to mil-spec dimensions and engineered to perfection, this handguard eliminates bulk while retaining strength and stability. Features:…

    Read moreDone
  • Aero Precision Freedom M4E1 Stripped Lower Black

    Aero Precision Freedom M4E1 Stripped Lower Black

    $160.00

    DESCRIPTION Our Special Edition: Aero Precision Freedom M4E1 Stripped Lower Black features a custom engraved American Flag graphic on the magwell of our popular M4E1 Lower Receiver. Markings Include Model “FREEDOM” and “XXXX-4July” serial number range. Like all of our receivers, this product is machined to mil-spec dimensions and works with standard AR15 components. Includes:…

    Read moreDone
  • Aero Precision AR15 Assembled Upper Receiver FDE

    Aero Precision AR15 Assembled Upper Receiver FDE

    $140.00

    DESCRIPTION The Aero Precision AR15 Assembled Upper Receiver FDE comes with the port door and forward assist already installed. Forged from 7075-T6 aluminum, this assembled upper is precision machined to mil- spec M16/M4 specifications and features M4 feedramps. Match this upper with one of our AR15 lower receivers for a solid and dependable fit. Features:…

    Read moreDone
  • DESCRIPTION The Aero Precision M5E1 Handguard Barrel Nut is used to connect Aero Precision M5 Enhanced Handgaurds to DMPS pattern threaded upper receivers. This product comes with 5 shims to properly time the gas tube with the upper receiver. Includes: M5E1 Handguard Barrel Nut Shim Pack (5 shims) Features: Material: Machined from 1144 Stressproof® Steel Coating: QPQ/Melonite Torque to 65 ft lbs with a standard AR15 armorer's wrench Please Note: If you intend to connect an Aero Precision Handguard to a standard threaded upper receiver, you will need a M5E1 Handguard Barrel Nut. You will need to select between an Aero/DPMS threaded barrel nut and an Armalite threaded barrel nut, depending on your upper receiver. If you have our M5E1 Enhanced Upper Receiver, you do not need a M5E1 Handguard Barrel Nut as the barrel nut and rail mounting platform are forged directly on to the upper receiver itself.

    Aero Precision M5E1 Handguard Barrel Nut

    $75.00

    DESCRIPTION The Aero Precision M5E1 Handguard Barrel Nut is used to connect Aero Precision M5 Enhanced Handgaurds to DMPS pattern threaded upper receivers. This product comes with 5 shims to properly time the gas tube with the upper receiver. Includes: M5E1 Handguard Barrel Nut Shim Pack (5 shims) Check out our Black and FDE Enhanced…

    Read moreDone
  • Sale! DESCRIPTION Save off the combined price when you buy the Aero Precision M5E1 Enhanced Builder Set! This package deal features the pieces you need to start building your own M5E1 (.308) Rifle, including an M5 Stripped Lower Receiver, M5E1 Upper Receiver and Enhanced Gen 2 Handguard of choice. Includes: M5 Stripped Lower Receiver M5E1 Assembled Enhanced Upper Receiver Enhanced Gen 2 15" Handguard All 3 pieces are finished in mil-spec Anodized Black Add barrels BCGs, CH, and spare parts

    Aero Precision M5E1 Enhanced Builder Set 15″

    Original price was: $650.00.Current price is: $639.99.

    DESCRIPTION Save off the combined price when you buy the Aero Precision M5E1 Enhanced Builder Set! This package deal features the pieces you need to start building your own M5E1 (.308) Rifle, including an M5 Stripped Lower Receiver, M5E1 Upper Receiver and Enhanced Gen 2 Handguard of choice. Individual Parts, Includes: M5 Stripped Lower Receiver M5E1…

    Read moreDone
  • This Ballistic Advantage 14.5" .223 WYLDE HANSON STAINLESS barrel is machined from 416 Stainless Steel with a bead blasted finish. Our Premium Series Barrels feature a Nickel Boron Coated Extended M4 Feed Ramp Extension. Hanson Series Barrels feature our proprietary BA Hanson profile and include a pinned lo-pro gas block. Hanson barrels are not designed to work with aftermarket piston kits. Check out our mid length gas tubes and muzzle brakes in spare parts Ballistic Advantage 14.5" .223 WYLDE HANSON STAINLESS Specs

    Ballistic Advantage 14.5″ .223 WYLDE HANSON STAINLESS

    $235.99

    This Ballistic Advantage 14.5″ .223 WYLDE HANSON STAINLESS barrel is machined from 416 Stainless Steel with a bead blasted finish. Our Premium Series Barrels feature a Nickel Boron Coated Extended M4 Feed Ramp Extension. Hanson Series Barrels feature our proprietary BA Hanson profile and include a pinned lo-pro gas block. Hanson barrels are not designed…

    Add to cartDone
  • DESCRIPTION Our state-of-the-art Aero Precision M5E1 Enhanced Upper Receiver FDE platform starts here. The M5E1 upper receiver is a one-piece design combining the handguard mounting platform with the upper itself. Through superior engineering, we have condensed the parts needed to mount a free-floated handguard to a mere 8 screws. Since the handguard mounting surface and upper are of the same forging, not only is it a stronger system, but we are able to make additional lightening cuts to save weight and allow for more efficient cooling. Ease of installation - Simply insert your barrel assembly into the M5E1 upper, tighten it using the included barrel nut and slide your rail on and tighten the rail screws. Within minutes you have a modular, free-floated rail. Features: M4 Feedramps .2795 takedown pin holes Comes assembled, with dust cover and forward assist installed M5E1 Specific Details: Handguard mounting platform is forged into the receiver Works with Aero Precision M5 Enhanced Handguards Barrel nut included Torque to 65 ft. lbs. with an armorer's wrench (we recommend a TAPCO® Armorer's Wrench) Includes: M5E1 Upper Receiver in FDE Cerakote Port Door and Forward Assist installed Barrel Nut Check out our M5 FDE stripped lowers and Enhanced FDE handguards Please Note - - The M5E1 Upper Receiver is specifically designed to be used with our M5 Enhanced Handguards. It will not work with other AR10/308 handguards.

    Aero Precision M5E1 Enhanced Upper Receiver FDE

    $250.00

    DESCRIPTION Our state-of-the-art Aero Precision M5E1 Enhanced Upper Receiver FDE platform starts here. The M5E1 upper receiver is a one-piece design combining the handguard mounting platform with the upper itself. Through superior engineering, we have condensed the parts needed to mount a free-floated handguard to a mere 8 screws. Since the handguard mounting surface and…

    Read moreDone
  • DESCRIPTION This Aero Precision Stripped Lower Special Edition: Franklin Snake lower receiver features Benjamin Franklin's political cartoon "Join, or Die" engraved on the magwell. This design was created in 1754 to represent the need for unification among the Thirteen Colonies later becoming an iconic symbol leading up to and during the American Revolution. The cartoon was used to encourage Colonists to stand together as it was pivotal to the success of the Revolutionary War. This design remains symbolic of American pride, perseverance, and unification nearly 250 years later. The M4E1 Lower Receiver delivers billet aesthetics in a forged package. This custom designed enhanced forging is machined from 7075-T6 Aluminum and compatible with all mil-spec AR15 parts. Aside from the visual upgrades this custom engineered design provides that challenge much more expensive billet options, we have added several functional features to the lower receiver to simplify the assembly process for the at home builder. M4E1 Lower Receiver Improvements: Threaded Bolt Catch Roll Pin - Allows for simple installation of the bolt catch and virtually eliminates the chance to damage the finish during installation (pin included). 1/16" Hex Key required for assembly. Integrated Trigger Guard - Eliminates the possibility of breaking the trigger guard tabs by integrating the trigger guard into the lower, creating a stronger more rigid platform to build upon. Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver using a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver. Threaded Takedown Pin Detent Recess - Allows user to easily install the Takedown Pin detent and spring with the use of a 4-40 set screw (no more launching detents across the room). Increased Magwell Flare - Increased the flare of the magwell to aid in quick and efficient magazine changes. Marked and milled to accept short-throw safety selectors, but will work with standard selectors as well. Add some of our SPARE PARTS to complete your lower! Includes: Stripped M4E1 Lower Receiver Nylon tipped tensioning set screw Threaded Bolt Catch Pin Aero Precision Stripped Lower Special Edition: Franklin Snake Specs Shipping to FFL Dealer Required Yes Made In America? Yes Platform AR15 Material Machined from 7075-T6 forged aluminum Select Your Finish Anodized Black Markings "Cal Multi", "JODM4-" Serial Number Designation Compatibility Works with standard AR15 components and magazines Weight(s) 8.61 oz Other Rear takedown pin detent hole is threaded for a 4-40 set screw. Threaded Bolt Catch Roll Pin (Included).

    Aero Precision Stripped Lower Special Edition: Franklin Snake

    $160.00

    DESCRIPTION This Aero Precision Stripped Lower Special Edition: Franklin Snake lower receiver features Benjamin Franklin’s political cartoon “Join, or Die” engraved on the magwell. This design was created in 1754 to represent the need for unification among the Thirteen Colonies later becoming an iconic symbol leading up to and during the American Revolution. The cartoon…

    Read moreDone
  • DESCRIPTION The Aero Precision AR15 5.56 PRO Series BCG Black Nitride is built from the ground up to meet the demands of the most extreme conditions. Each component and manufacturing process of the PRO 5.56 Bolt Carrier Group was deliberately chosen to increase the reliable service life of the bolt carrier group and its components. Bolt The bolt is one of the most important parts of the bolt carrier group. Machined from 9310 steel, a proprietary flash nitride process was chosen to ensure proper heat treatment on the bolt. When properly heat treated, 9310 steel provides superior strength and durability when compared to C158. The cam pin channel is counter bored, eliminating the need for swaging. Swaging is the industry standard, however this process creates more stress on the bolt during manufacturing by displacing material rather than cutting it to the proper dimension from the start. Machined from 9310 steel Shot peened MPI tested Proper heat treatment ensured via proprietary flash-nitriding process Cam Pin Each PRO cam pin is precision ground after heat treatment to exacting specifications and given a nitride finish. The cam pin features an engraved indexing mark on one side of the cam pin face; a concept that has been popularized by Chad Albrecht at School of the American Rifle. Cam pins traditionally wear more heavily on one side and when installed inconsistently can create excessive wear over time. When the cam pin becomes “loose” this can create excessive wear on the bolt itself shortening overall life. The indexing mark allows for consistent installation during maintenance which in turn reduces wear on not only the cam pin but the bolt over time to help extend overall service life. Machined from 4140 steel Precision ground after heat treatment Engraved indexing mark Nitride finish Extractor The extractor features a phosphate finish. The extractor is one of the few places where it is beneficial to have a “rougher” finish as it allows for more positive engagement with the case when pulling it out of the chamber. Machined from 4140 steel Heat treated Shot peened Phosphate finish Carrier Each PRO BCG utilized an M16 cut carrier and features a nitride finish. Internal critical surfaces are precision ground to exacting tolerances to ensure optimal gas efficiency. The same machining standards are used for the carrier rails providing a super smooth fit and function from the start. Machined from 8620 steel M16 Cut Carrier Nitride Finish Critical surfaces precision ground for optimal gas efficiency and reliability Gas Key Machined from hardened 4140 steel Torqued to spec with grade 8 hex fasteners Properly staked to mil-spec Nitride finish Ejector Machined from S7 tool steel Firing Pin Ground from 8640 steel Nitride Finish Check out our Charging Handles and Complete Uppers Idaho

    Aero Precision AR15 5.56 PRO Series BCG Black Nitride

    $180.00

    DESCRIPTION The Aero Precision AR15 5.56 PRO Series BCG Black Nitride is built from the ground up to meet the demands of the most extreme conditions. Each component and manufacturing process of the PRO 5.56 Bolt Carrier Group was deliberately chosen to increase the reliable service life of the bolt carrier group and its components….

    Read moreDone
  • Aero Precision M4E1 Threaded Stripped Upper Blem FDE

    Aero Precision M4E1 Threaded Stripped Upper Blem FDE

    $129.99

    The M4E1 Threaded Upper Receiver features a new angular machined design that helps it stand apart from standard mil-spec upper receivers. This upper receiver features the same enhanced body profile as our M4E1 Enhanced Upper Receiver but is threaded to accept a standard AR15 barrel nut. It is forged from 7075-T6 Aluminum and precision machined to work with all mil-spec AR15 parts.

    The M4E1 Threaded Upper Receiver is designed to pair perfectly with our new M4E1 Lower Receiver, giving you a billet looking receiver set at a fraction of the billet price.

    Features:

    • New enhanced forging that gives the upper receiver a “billet look”
    • New picatinny profile that blends seamlessly with our Enhanced and ATLAS Series Handguards
    • M4 Feedramps
    • .250 takedown pin holes
    • Includes threaded forward assist roll pin
    • DOES NOT include port door or forward assist

    Includes:

    • M4E1 Threaded Upper Receiver in Magpul™ FDE Cerakote

    This product is blemished. Blemishes may include:

    • Plating inconsistencies
    • Pits
    • Scratches
    • Dents
    • Flaws in finish

    Our blemished products are fully functional, they just didn’t meet our high standards. They are a great product at a discounted price for someone who doesn’t mind a slight imperfection. We do not accept returns on blemished products.

    Read moreDone
  • Sale! The Aero Precision 7" ATLAS S-ONE Handguard is the newest addition to the Aero Precision Handguard lineup. Machined from 6061-T6 Aluminum, the S-ONE line of handguards are designed with size and weight in mind, providing the perfect handguard for your lightweight build. Our proprietary ATLAS attachment system is a durable and dependable mounting platform, maintaining a slim profile while still providing the strength and stability customers have grown to love from Aero Precision handguards.

    Aero Precision 7″ ATLAS S-ONE Handguard AR15

    Original price was: $190.00.Current price is: $169.99.

    DESCRIPTION The Aero Precision 7″ ATLAS S-ONE Handguard is the newest addition to the Aero Precision Handguard lineup. Machined from 6061-T6 Aluminum, the S-ONE line of handguards are designed with size and weight in mind, providing the perfect handguard for your lightweight build. Our proprietary ATLAS attachment system is a durable and dependable mounting platform,…

    Add to cartDone
  • aprh101205c-750-low-profile-gas-block-aero-logo-nitride-1

    Aero Precision .750 Gas Block Low Profile – Black Nitride

    $40.00

    These gas blocks along with our gas tubes create an efficent and reliable gas system for your AR15 or AR 308 rifle build.

    Features:

    • Fits barrels with .750 Outer Diameter
    • Constructed from 4140 hardened steel
    • Choose No Aero Logo or Aero “A” Logo blocks
    • Nitride or Phosphate coating
    • Low profile for easy fitment
    • Set Screws are Steel 10-32 x 3/16 Knurled Cup Point
    • Made in the USA
    • *Roll pin not included*

    Please note: We do not recommend the use of red thread locker on the threads of the set screws. If you decide to use thread locker we recommend using the non permanent variety.

    Add to cartDone